Home » Home Projects » DIY back tab curtains

DIY back tab curtains

Today I’m excited to share with you my finished DIY back tab curtains. As you may remember I’m participating in a 30 day room makeover with Jo-Ann Fabric’s and this is one of the projects I completed for the room. These curtains are a fun way to dress up any room and give your room a custom look. Now before I get into the sewing tutorial I wanted to share with you a tip on hanging up your curtain rod, because you’ll want to move your curtain rod BEFORE measuring and cutting your fabric.
DIY back tab curtains

I’ve always heard hang your curtains HIGH and WIDE from some of my favorite designers because it makes the room feel bigger. Well this image below from Home Goods gives the PERFECT example of this. Look how much bigger the room feels! I’m such a visual learner, so for me it always helps to see a picture.

Hang your curtain rods high and wide! #homedecor #tips

I will be adding crown molding this weekend, so I didn’t take the rods as high as I would have liked to, but I did bring them up about 3 inches. My window is also HUGE, so the curtain rod would only extend 2 inches on each side. But those 2-3 inches really did help. I also removed the ugly blinds and covered up those holes with paint.

DIY curtains - move the rods higher and wider to make the room appear larger. Good to know!

If you can remember in my BEFORE post, this is what my living room looked like two weeks ago. No curtains, ugly blinds and a large couch that made the room feel tiny and…brown. Since then I finished the curtains, bought a new couch and scored some really awesome chairs at Goodwill that I will be updating.

living room makeover

Making your own curtains is one the best ways to get exactly what you’re looking for. I couldn’t find any patterns I loved and none of the curtains in stores were big enough for this window, so I ended up making them. I am SO glad I did. I’m not going to lie… this is not a “quick” project, but it’s certainly not hard. It will take about a day if you have a large window like mine. I had to make 4 panels. However if you have a smaller window, you can probably finish this project in about 4 hours. If you’re a pro, even less! 😉

I found this and this article helpful when preparing to sew these back tab curtains. I am certainly no professional, and if I can do it… you can too! Grab a diet coke, some chocolate and turn on your favorite show… now let’s get sewing!

Supplies:

  • Fabric (yardage will very depending on window lengths)
  • Sewing machine
  • Coordinating thread
  • Pins
  • Rotary cutter or fabric scissors
  • Cutting mat
  • Marking Pen
  • Tape measurer
  • Ribbon
  • Matches

Instructions:

cutting fabric - DIY curtains

1. Cut your fabric

This part actually took me the longest to figure out since I was combining two fabrics, but it may have been because it was at midnight. My brain just doesn’t work as fast after midnight. 😉 Anyways… the way to determine how much fabric you will need is to measure from the top of the curtain rod to the very bottom of the floor. Then add about 15 inches to that number. So my space was 85 inches from top to bottom, so I figured I would need 100 inches of fabric per panel. I also added about 5 inches to my width so I could do a one inch hem on each side and still have room to overlap the curtain panels a little bit. It’s always better to cut more than not enough!

So HERE is the tricky part if you’re going to do 2 different patterns. You’ll want to divide the 100 number by 3 since the bottom third of your curtain will be a different pattern. So for mine I cut the blue fabric at 70 inches long by 40 inches wide and then the grey fabric 30 inches long and 40 inches wide. If you are wanting ONE solid color you can just make one cut and skip step 2.

sewing fabric - DIY curtains

2. Sew the 2 panels

Line the two fabrics on top of each other (right sides together) and pin along the top edge. Then sew the two ends together (the back side of the fabric should be facing up while you sew). I also added a zig zag stitch along the very edge to prevent any unraveling.

ruffle trim

3. Sew the ruffle trim

Next sew on the ruffle trim (fabric right side up this time, since the ruffle will be on the front). Make sure to use the coordinating color thread so you don’t see the line.

sewing a hem

4. Hem the edges

Next you will hem your edges (except for the bottom edge). I find it easiest to fold in the fabric 1/2 inch, iron it and then fold it under again. Then press and pin. I always used to skip the ironing part… but trust me, it makes sewing the hem so much easier. I ended up doing a 1 inch fold on both sides and then a 4 inch hem on top.

sewing a hem 1

It always helps me to use a ruler. So remember, fold, press, pin and then sew.

making ribbon tabs

5. Making ribbon tabs

Once your panels are finished, you’ll cut 8 pieces of ribbon (per panel) 3 inches long. Then you will burn the edges with a match to prevent unraveling.

sewing ribbon tab curtains

Then you will sew the ribbon tabs onto the BACK of the curtains. Make sure to use a coordinating color thread so it will blend in. Space the ribbon tabs about 5 inches a part.

DIY ribbon tab curtains

6. Hang your curtains up

Cut any loose strings and then hang your curtains up and determine where to make your bottom hem.

I wanted to create that “luxurious puddle effect” so I put my pins in place 1 1/2 inches out and then folded the fabric up to the pin and created my hem. I left the pins in place to make sure I did not sew above those pins. For more tips on sewing hem’s check out this tutorial here.

hem bottom of curtains

Now hang up your curtains and admire all your hard work!

DIY curtains

Here’s a close up on the fabric and ruffle trim. Swoon! When sewing big projects like this I always have to remind my self that it does not have to be perfect. No one will ever know from far away! 😉

Hopefully you enjoyed this tutorial! If you have any questions, leave them in the comments. Come back next week to see the full reveal!

Fabric sources:

HGTV HOME Dazzler Teal

HGTV HOME Chevron Chic Quartz

HGTV HOME 1” Pleat Twill Shadow

Tip: Search for coupons before purchasing. 😉

What tips do you have for sewing curtains?

Thanks for reading. Have a great day!

For more sewing tutorials check out these posts below:

How to thread a sewing machine

15+ Sewing tutorials 

sewing tutorials

Similar Posts

Leave a Reply

Your email address will not be published.

29 Comments

  1. Your curtains look awesome – I really like the two toned look. I just finished making curtains for our master bedroom last weekend. I hop to have them up on my blog this week. Great job!

    1. The teal is Polyester and the chevron is Rayon, Cotton, and Polyester! The direct link to the fabrics is near the bottom of the post under fabric sources! Hope that helps! 🙂

  2. I’m debating about making or buying curtains for my living room makeover. I might have missed something, but can you explain why you added 15 inches to the length when figuring how long to cut your fabric? LOVE how yours turned out!

    1. Thanks Lindsay! I added 15 inches so I could have plenty of room. I wanted a 5 inch hem on top and bottom and I wanted it to drape longer so I added 15 inches. You could always go with 10 inches and have a shorter hem and not have them touch the ground! Good luck with your curtains! 🙂

      1. Ok another question. I have a really wide window too and I noticed you only have three brackets on your rod. Mine has four and I’m wondering how wide your window is. If i can get away with only putting three brackets back up that would be awesome! Thanks so much!

        1. My window is 115 inches wide. I placed the curtain rods in studs so it would hold up well. I did 4 panels, 2 on each side! Good luck with your curtains! 🙂

  3. I guess it helps if I submit a comment…. 😉 Anyhow, are the back tabs too difficult for a novice sewer to complete?

    I love this tutorial, btw.

    1. I think a novice sewer could definitely do it, it just takes a long time. You basically are just sewing straight lines but just be careful to measure in between the cuts. Hope that helps! 🙂

  4. I want to do this also – having a local seamstress help me out.  She is advising against using the ribbons as tabs because they will stretch over time.  How are yours holding up?  I see this done a lot and it saves the expense and bulk of rings being attached on back.   I have four huge windows in an open floor plan so I do want the look to be nice – I’m not going to live here forever, though, so maybe the stretch is the next owner’s problem:-).
    Thanks for sharing your beautiful project!

  5. I love the curtains, plus your  tutorial is very easy to follow. I’ll bookmark this for my future DIY project.